The WyreStorm EX-1UTP-IR-100 balun set uses new HDBaseT technology and extends your HDMI version 1.4 1080p, 3D or 4Kx2K video
and Dolby TrueHD/DTS Master Audio (or lower audio formats),
with bi-directional IR and RS232 for control up to 100m away from your HDTV HDMI source
using a single Cat6 UTP cable. It also incorporates 10Mbps Ethernet transmission in the HDMI signal and supports 48bit colour depth.
How it works
The WyreStorm EX-1UTP-IR-100 sender (TX-100-HDBT) unit sits next to your computer, Blu-ray player or SkyHD box. Use an HDMI cable to connect
your HDMI video source to the sender. The WyreStorm EX-1UTP-IR-100 receiver (RX-100IR-HDBT) sits next to your HDMI display -
up to 100m away for 1080p over Cat6. The display plugs into the back of the RX-100IR-HDBT receiver. A single Cat6 cable is required to connect the sender and
the receiver units to each other.
Cable distances and connections
Like all HDMI extenders, these units are intended to be used on a direct point to point basis, ideally without any wall data outlets or passing
through a patch panel. Any connections in the Cat6 cable will inevitably reduce the maximum distance that the HDMI signal can travel, and may cause complete loss of
video and audio. Having said this the WyreStorm EX-1UTP-IR-100 has the ability of buffering and amplifying. Series connection of WyreStorm EX-1UTP-IR-100
achieves long distance transmission of HDMI signal so two pairs or more WyreStorm EX-1UTP-IR-100 can be used to create a larger distribution
(ie by daisy chaining).
If you have any doubts about your choice of extender please call us and we will do the best we can to advise you on your own particular situation.
NB: This HDMI extender system carries HD digital audio and video. Both the sender and receiver are powered, each by its own plug top power supply.
The RX-100IR-HDBT unit also has built-in ESD (Electro Static Discharge) protection to avoid interference of the AV quality.
The WyreStorm EX-1UTP-IR-100 balun set is HDCP compliant.
Package Includes:
- One WyreStorm EX-1UTP-IR-100 sender (TX-100-HDBT)
- One WyreStorm EX-1UTP-IR-100 receiver (RX-100IR-HDBT)
- Two IR receivers
- Two IR flasher emitters
- Two 5v Power Supplies
Features:
- Extends HDMI1.4 at 1080p60 up to 100m, and works with 3DTV and 4K2K
- An IR emitter in the transmitter and the included IR receiver which connects to the receiver allow bi-directional IR remote control
of source devices from remote viewing location and vice versa
- Supports resolutions up to 1080p, 3DTV (2 x 1080p) and 4K x 2K (4,096 x 2,160 pixels)
- Supports high bit-rate audio formats (Dolby TrueHD / DTS Master Audio)
- Delivers uncompressed 7.1 channel digital audio
- 10/100 Ethernet in addition to HD/audio/video and control
- Auto-adjustment of feedback, equalisation and amplification, you do not need to make manual adjustments for the length of the cable, although
this is possible using the DIP switches
- Supports 48bit colour depth
- Supports refresh rates of 24Hz, 30Hz, 50Hz and 60Hz
- Fully HDMI and HDCP compliant (when both power supplies are used)
- ESD protection inside
Specifications:
- Signalling rate: 2.25 Gbps
- Single Link Range: 1080p@60Hz @48 b/pixels, 3D and 4Kx2K
- Input Video Signal:0.5 - 1.0 volts p-p
- Input DDC Signal: 5 volts p-p (TTL)
- Input HDMI Connector
- Output HDMI Connector: Molex 24 pin female
- Link Connectors: RJ-45
- RS232: 9 pin Dsub
- Power Consumption: 7.5 Watts (max)
- Dimensions: 105mm W × 152mm H × 31mm D (each unit)
- Shipping Weight: 0.5kg
For the user manual, click here. (PDF 466KB)
01603 660901
