The MuxLab VideoEase RF/TV balun allows you to transmit RF signals from your UHF and FM aerials,
or distribution amplifier, to the TV, VCR, radio, etc
using Category 5e unshielded twisted pair cable in a point-to-point connection. It can also be used with Sky or Sky Plus on
the RF output from the digibox. The RF/TV balun saves the cost of installing expensive and bulky coax cable and is a smart,
fast way of distributing RF signals.
NB: The RF/TV balun will NOT connect between your satellite dish and the digibox because the dish receiver requires power
and this cannot be carried over the Cat5e cable.
The RF/TV balun works in conjunction with splitters, amplifiers and cable modems.
The MuxLab videoEase RF/TV balun uses just 2 strands of the Cat5e cable. This means that a single Cat5e can carry both
the downlink and the uplink from a distribution amplifier located in the loft (with 2 twisted pairs to spare).
NB. This balun will not permit Infra-red control signals to be passed over the
Cat5 cable for control of connected Sky or Freesat boxes.
Features & Benefits
- Supports broadband RF, cable TV, VHF and FM
- Supports channels TV 2-77, VHF 2-13, FM broadcast band
- Works with cable TV, satellite receivers (see note above), VCR, RF splitters and amplifiers
- Works up to 100m via Cat 5 twisted pair depending on frequency although this may require "tilt" amplification to
achieve the required distance
- Bandwidth 900 MHz
Connections:
- Low return loss eliminates "ghosting"
- Built-in male "F" connector for coax
- RJ45 connector for twisted pair
- Uses 2 strands of the Category 5e cable per balun
For a full specification sheet click here
01603 660901
