This Decomatic electric roller blind system by Goelst offers a solution for situations requiring shading rather than full home cinema black-out.
This Type 10 Decomatic has an open roller, without cassette enclosure. It has a small light gap which is equal on both sides retaining the symetrical appearance of the window. There are no
visible screw connections, and the quiet Decomatic motor system is maintenance free.
The installation is similar to a normal manual blind having a bracket at each end. It is not necessary to dismantle the roller blind in order to programme the motor
system, since programming is carried out via the control switch or remote control.
The motor is a three wire 24V unit.
The motor has a safety clutch and electronic automatic overload cut-out. End positions are saved even after
a power failure.
Decomatic Roller Blind Type 10 features:
- Open style of roller up to a maximum width of 280cm. (For larger widths please ask for the Type RL60 Large Decomatic, mains voltage version)
- Maximum drop of 300cm
- Available with a wall mounted switch - version C10, or with RF remote control - version D10
- Contents Type D10 [with reference to schematic]
- Electric roller blind
- Plug top transformer
- Four core cable(to run from RF receiver to motor) -[a]
- RF sensor
- RF remote control handset (10 channel)
- Contents Type C10 [with reference to schematic]
- Electric roller blind
- Wall mounted switch incorporating transformer
- Four core cable, 2 metres (to run from switch to motor) - [a]
Materials
A variety of materials are available. Materials are available with varying light transmission from 0% for home cinema through to gentle shading.
For home cinema the standard material is called Life Transzero, and a link is given below to a colour chart.
(We can provide swatches for a range of materials against a small deposit). The prices shown below are based on Group 2 materials, including the Transzero fabric,
and represent a mid range price band.
Powering the blind
Type C10 incorporates a 240V/24V transformer in the surface mounted wall switch.
Type D10 uses a plug-top 240V/24V power supply unit.
Multiple blinds can be powered and controlled individually, as a group, or both.
They can be controlled by both switch, RF and infrared (IR) if you require.
An optional digital timer is also available, see below. This does require some extra wiring.
When ordering please state FRAME width and drop, ie window size not material size. Blinds are supplied made to measure to suit the frame size you
specify. They cannot be altered once delivered. Prices are shown in bands, eg a 175cm wide blind will be priced in the 200cm band.
Please also state fabric type and colour.
For a leaflet on the Goelst Decomatic click here. (PDF 911KB)
For the Goelst Decomatic installation guide click here. (PDF378kB)
For a colour chart of the standard home cinema suitable material, click here - Life Transzero.
These products are 'Special order items', delivered directly from the factory and cannot be returned for full refund within 14 days if unsuitable. (See Terms and Conditions)
01603 660901
