This Decomatic roller blind system by Goelst offers a solution for each installation situation. It is
based on a uniform design whether it is a simple shading blind, a dim-out blind or a black-out blind for home cinema.
This Type 13 Decomatic electric roller blind rolls up into a cassette for a very neat finish. The standard Type 13 has a small light gap which is
equal on both sides retaining the symetrical appearance of the window. There are no
visible screw connections, and the quiet Decomatic motor system is maintenance free.
The installation is easy because the mounting plate and cassette are clipped into the assembled clip holder
as a complete unit. It is not necessary to dismantle the roller blind in order to programme the motor
system, since programming is carried out via the control switch or remote control.
The motor is a three wire 24V unit that is normally controlled by RF (Radio Frequency) but can interface with Lutron Grafik Eye scene
lighting controllers, through the GRX-AV Contact Closure Interface.
The motor has a safety clutch and electronic automatic overload cut-out. End positions are saved even after
a power failure.
Decomatic Roller Blind Type 13 features
- Cassette, ie blind rolls up inside a cassette (type 13), maximum width 200cm. (For larger widths please ask for the Type RL63 Large Decomatic, mains voltage version)
- Maximum drop of 220cm
- Available with a wall mounted switch - version C10, or with remote control - version D10
- Optional BLACK OUT side channels and bottom channel ideal for home cinema situations
- Contents Type D13 [with reference to schematic]
- Electric roller blind
- Plug top transformer
- Four core cable(to run from RF receiver to motor) -[a]
- RF sensor
- RF remote control handset (10 channel)
- Contents Type C13 [with reference to schematic]
- Electric roller blind
- Wall mounted switch incorporating transformer
- Four core cable, 2 metres (to run from switch to motor) - [a]
Materials
A variety of materials are available. Materials are available with varying light transmission from 0% for home cinema through to gentle shading.
For home cinema the standard material is called Life Transzero, and a link is given below to a colour chart.
(We can provide swatches for a range of materials against a small deposit). The prices shown below are based on Group 2 materials, including the Transzero fabric,
and represent a mid range price band.
Powering the blind
Type C13 incorporates a 240V/24V transformer in the surface mounted wall switch.
Type D13 uses a plug-top 240V/24V power supply unit.
Multiple blinds can be powered and controlled individually, as a group, or both.
They can be controlled by both switch, RF and infrared (IR) if you require.
An optional digital timer is also available, see below. This does require some extra wiring.
When ordering please state FRAME width and drop, ie window size not material size. Blinds are supplied made to measure to suit the frame size you
specify. They cannot be altered once delivered. Prices are shown in bands, eg a 175cm wide blind will be priced in the 200cm band.
Please also state fabric type and colour.
For a leaflet on the Goelst Decomatic click here. (PDF 911KB)
For the Goelst Decomatic installation guide click here. (PDF378kB)
For a colour chart of the standard home cinema suitable material, click here - Life Transzero.
This product is covered by a 3 year manufacturer's warranty
These products are 'Special order items', delivered directly from the factory and cannot be returned for full refund within 14 days if unsuitable. (See Terms and Conditions)
01603 660901
