The Beamax M series of high quality electric projection screens are ideal for custom install home cinema rooms, allowing
control using the standard 2 way switch included in the kit, or any 2 way retractive switch to suit your decor. There is
also an optional remote control system. We supply these screens in the standard 16:9 home cinema widescreen format, but they can be
obtained in conventional 4:3 format upon request.
The Beamax M series is top of the Beamax electric screens range and has a matte white screen with a high gain of 1.5
ensuring a bright image even when running your projector on economy mode. It offers easy installation through flexible placement of the
mounting brackets on the aluminium casing. The Anti Leathermark Roller ensures a wrinkle-free surface and prevents curling of the
projection surface edges.
NB: The screen drops from the front of the container thereby allowing you to lower it in front of a plasma screen. If you need it to drop
from the rear of the container please let us know at the time of ordering. The cable exits from the rear, top right of the container. (The photo left shows the cross-section of the container
but in this diagram with the screen dropping from the rear as in the M-tensioned screen)
Control Systems
Automated control
By using a Beamax 12V trigger (part number 10539), providing your projector has a 12V output, you can trigger the screen to drop when the projector is turned on. The
electronics are contained within the box shown above.
For a wiring schematic of the 12V trigger click here: 
If your projector does not have a 12V trigger output, you can use the Beamax 10550 IR trigger kit. This includes an IR transmitter that fits in the 240V
power line connected to the projector (see photo, item at the top), and an IR receiver (see photo bottom item) that fits in place of the screen switch.
The receiver of this system can be used alone if you require the screen to be raised and lowered using an IR remote control.
RF Remote control
The Beamax 10019 kit is a complete set used to remotely control any electrical projection screen. It consists of a receiver (10016), a handheld control unit (10017) and a wall mounted control unit (10018).
IR Remote control
The Beamax 10622 kit is a complete set used to remotely control any electrical projection screen using Infra-Red.
It consists of an IR control unit, an IR receiver module, and a handheld control unit. Note that this system requires 'line of sight' between
the remote control and the IR receiver.
For the 10622 manual click here.
Sizes shown are total screen dimensions including borders of approx 5cm on each edge; additionally, the screen has a 'tail' (ie long top border) at the top of the screen of 40cm, so that the height
of the viewing area may be adjusted vertically. The total height of the screen is 40cm more than the figure shown. Figure in brackets is diagonal of viewing area.
- Nominal size - viewing size - diagonal(cm)
- 154 x 89 - 148 x 83 - 170
- 174 x 102 - 164 x 94 - 188
- 194 x 114 - 184 x 104 - 211
- 220 x 128 - 210 x 118 - 241
- 244 x 142 - 234 x 132 - 269
- 293 x 169 - 283 x 159 - 325
For the wiring guide for the screen click here.
These products are 'Special order items', delivered directly from the factory and cannot be returned for full refund within 14 days if unsuitable. (See Terms and Conditions)
01603 660901
