Grafik Eye back box
The standard metal Grafik Eye back box for all controllers ie GRX3102, GRX3103, GRX3104, GRX3106 and GXI3106 Grafik Integrale.
This also suits the 3500 series.
This back box
is 200mm wide x 95mm tall x 76mm deep.
Wall Station (accessory) back box
A single gang metal back box for use with the Grafik Eye wall stations.
Surface mount box
A Grafik Eye would normally be installed using a back box for flush fitting into the wall, but this is not always convenient
or necessary. In these cases you can use the surface mount back box for quick installation.
Grafik Eye cable
(GRX-CBL)
The preferred cable for connecting wall stations and interfaces to the Grafik Eyes is the
special 4 core Belden cable made specifically for this purpose. It has 2 cores for carrying the data
between devices, and 2 cores carrying the low voltage necessary to power the wallstations and
interfaces. The power cores are shielded from the data ones by foil to prevent interference
For Grafik Eye cable specification sheet click here (jpg 381kB)
Grafik Eye faceplates
(GRX-4GRC-)
Every Grafik Eye (and Integrale) comes with a white faceplate (and dark translucent upper
window). As an alternative Lutron offer other metal finishes. Standard finishes are bright brass,
satin brass, bright chrome and satin chrome. Other finishes are available to special order.
Accessory Lutron screwless faceplates
(NGRX-)
Every wall station comes with its own screwless white faceplate . As an alternative
Lutron offer other high quality metal finished screwless plates with facias to suit the specific wall station.
Standard finishes are bright brass,
satin brass, bright chrome and satin chrome. Normally these are full faceplates -see stainless steel example shown above in comparison with the Decora frame, however,
you can choose the screwless frame with a central plastic facia - see brass example above. To enable multiple wallstations to be mounted together,
these come in single, twin and triple units for the US style wall stations. This also allows
them to be combined with other low voltage controls such as multiroom audio keypads, eg Elan,
or Russound CA or ABUS.
Accessory 'Decora' screwed faceplates
As an alternative to the Lutron original equipment screwless faceplates for US style wallstations,
we can offer 'Decora' screwed faceplates in single, twin and triple gang combinations in
bright brass and stainless steel.
Lutron low voltage transformer
(LUT-ELVXF-CE-60)
To use electronic low voltage lighting with the standard Grafik Eye (as opposed to the Grafik
Integrale), the dimmable transformer must be of the 'LEADING EDGE' type not 'Trailing Edge' type. Lutron offer their own
50 watt electronic transformer that is guaranteed to work with any Grafik Eye
01603 660901
