The F Type Coaxial Connectors suitable for WF65/63 type cable. To fit the connectors simply strip back the cable’s outer sheath exposing the braiding by 20mm then fold the braiding back on itself. Cut the centre insulation back around 17-18 mm exposing the centre core, the cable is then inserted into the plug and the plug is “screwed” onto the cable. Ensure you have around 3mm of the core protruding beyond the end of the plug.
Tool-less twist-on F-Type plug
Suitable for 65/63 Type cables WF, PF CT65/63
Common fitting found on many external TV antennas
Excel Cat6A Keystone Modules have been designed to provide the exceptional performance required to support extremely high speed applications, including 10-Gigabit Ethernet. When used with Cat6a Cable, the Category 6A Keystone Modules provide an outstanding transmission medium free from the problems of alien crosstalk. The tool-less and snap-to-fit module ensures a quick and easy to terminate installation, and the standard Keystone fitting allows the use of the same module in patch panels, wall outlets and a variety of other applications.
The Leviton 61110-RW6 eXtreme Cat 6 connector is designed to be used with all QuickPort compatible products. The connector includes patented Retention Force Technology which promotes consistent performance over the life of the system. It features unique pair separation towers allowing for quicker and easier terminations. The connector is built on a 180-degree configuration with the punch field in the back, allowing for rear termination.
The patented EZ-RJ45 (Easy RJ45) connector simplifies RJ45 connector plug twisted pair terminations by allowing the wires to be inserted through the connector and pulled OUT THE FRONT. Reducing the distance between the wire twists and the pin contacts improves electrical specification performance
The patented EZ-RJ45 (Easy RJ45) Cat.6 connector simplifies RJ45 connector plug twisted pair terminations by allowing the wires to be inserted through the connector and pulled out the front. Electrical performance of the termination is optimized by pulling the EZ-RJ45 cat 6 connector down over the cable jacket and seating it tightly in the rear of the connector. By reducing the distance between the wire twists and contacts, performance is optimized – a necessary requirement if the Cat.6 data transfer speeds are to be maintained and not dropped to Cat.5e speeds.
The patented EZ-RJ45 (Easy RJ45) fully shielded plug, with an internal ground, combines the performance advantage exclusive to the EZ-RJ45 design with the performance advantage inherent to shielded products to provide an unparalleled solution for the market.
Simply45 re-engineered the Pass Through RJ45 Modular Plug to be…
- Simply Better Quality
- Simply Easier to Use
- Simply More Affordable
The SIMPLY45™ is a translucent single piece RJ45 that allows Cat5e twisted pair wire conductors to completely pass through the plug and out thefront. This allows you to easily see and verify the wire alignment order before crimping.
Simply45 RJ45 Pass Through Modular Plug For 23AWG (max 1.05mm) CAT6 UTP/ HNCPROPLUS UTP CABLES, UL94 V0 CMP/CMR/CM/LSZH-B2ca to Eca- 100 PCS Per Plastic Jar
Pass Through RJ45 Modular Plug – Faster Terminations Done Right the 1st Time
S45-1700 – Cat6/6a Unshielded – Staggered – Pass Through RJ45Simply45® Unshielded Pass Through RJ45 Modular Plugs for 23AWG Solid (Cat6/6a UTP Solid), Hi/Lo Stagger Wire Alignment, Wire Conductors 1.00-1.10mm/0.039″-0.043″, Max Cable OD 7.4mm (0.291″) UL94 V0 Commercial Rated, Red Tint- 100pcs/Jar. Previous Part