Show:

Global Cache GC100

  • Global Cache GC-100-06 Home Automation Network Adapter

    £184.99

    The Global Cache GC-100-06 Home Network Adapter connects diverse and previously unconnected devices and appliances in a network-based home. Using many commonly needed controls and sensor inputs in one box, the GC-100 provides an easy way for controlling real-world devices, reducing the time and complexity of an installation by eliminating piggybacked components and multiple power supplies. The GC-100-06 has 1 Serial/RS232 port and 6 IR ports.

    Add to cart
  • Global Cache GC-100-12 Network Adapter – IR, Contact Closure, RS232

    £349.98

    The Global Cache GC-100 range of Network Adapters connect a TCP/IP network to infrared (IR), serial (RS232), and contact closure (relay) devices. This allows the devices to be automated, controlled, and monitored over the network by third party software like iRule, DemoPad,CommandFusion and so on.

    Using many commonly needed controls and sensor inputs in one box, the GC-100 provides an easy way for controlling real-world devices, reducing the time and complexity of an installation by eliminating piggybacked components and multiple power supplies.

     

    Add to cart
  • Global Cache GC-RG1 General IR Receiver

    £70.02

    Capture IR frequencies from 30KHz to 72KHz for use of IR commands on your home automation network.

    The General IR Receiver plugs directly into the GC-IRE IR Extender to capture and digitize IR signals.

    Global Caché’s General IR Receiver can also operate within a Xantech or Xantech compatible environment.

    Add to cart
  • Global Cache GC-SP1 AC/DC Voltage Sensor

    £44.99

    The GC-SP1 monitors the on-and-off status of electronic components by detecting an AC or DC voltage greater than +/-2V. Voltages up to +/-24V can be connected to the GC-SP1 to determine the powered state of equipment, power strips (via a wall adapter), or the “ring” condition on a telephone circuit.

    Add to cart
  • Global Cache GC-SV1 Video Out Sensor

    £61.98

    Global Caché’s GC-SV1 Video Out Sensor monitors the power status of video equipment by detecting the presence of a composite video signal.

    The Video Out Sensor determines the power state of video equipment. When your VCR or DVD player is powered up, a video signal will be present even if the tape or DVD is not in play mode.

    The Video Out Sensor can be plugged directly into the GC-100 Network Adaptor connecting the sensor to the network.

    Additionally, the Video Out Sensor will work with other controllers which provide 5V power and accept digital logic (TTL) input.

    The Video Out Sensor connector is a standard 3.5mm stereo jack. It requires +5V to operate, it provides a sensor output representing the presence of a composite video signal.

     

    Add to cart
  • Global Cache IR Converter Cable, GC-CGX IR

    £44.99

    The GC-CGX is used to connect a Global Caché IR output (GC-100 or iTach) to a Xantech IR input. Global Caché IR outputs are converted to meet the IR input requirements for a Xantech IR distribution environment. IR signals from 30KHz to 72KHz can now be sent through an existing Xantech IR installation directly from one of our units. The GC-CGX is optically isolated to ensure circuit isolation and protection.

    Add to cart
Show: