Show:
  • Rako RA Bridge

    £224.40

    The RA-BRIDGE is a powerful network interface for use with a Rako wireless system. The RA-Bridge acts as a programming interface as well as having ethernet access for app control via smartphones and tablets.

    Add to cart
  • Rako RACUB

    £198.00

    The Rako RACUB is a compact dual relay RF switching module. Ideal for integrating motorised curtains, blinds and projector screens with the lighting control system. Controlled from any Rako Rakom RF device, for example the RPS030 /060 or RCM030 / 060 three or six button RF wall plates.

    Add to cart
  • Rako RAH07 RF Handheld Remote Control

    £120.00

    The Rako RAH07 is a wireless 7-button handheld controller providing 4 scenes plus ‘off’ and a global raise and lower (manual dimming). Powered by two lithium cells, the RAH07 will last more than 3 years on the same battery set.

    Designed to be used as an accessory to the RCP push button wall controller, the remote shares the same button layout as the keypad- enabling a familiar interface for comfort and ease of use.

    Add to cart
  • Rako RAK4F Switching and 0-10v Control Rack

    £554.40

    A four channel dimming rack, designed to be wall mounted in an electrical cupboard. Incorporating the latest dimming technology. Each of the four channels can independantly control 0-10v, DSI or DALI dimmable lighting load or switched circuits. The dimmer has four seperate dimming channels that can control a total of 2400w of lighting.

    Add to cart
  • Rako RAK4L Leading Edge Control Rack

    £554.40

    The Rako RAK4L is a four channel dimming rack, designed to be wall mounted in an electrical cupboard. Incorporating the latest dimming technology. The dimmer has four separate dimming channels that can control a total of 4800w/4000va of leading egde dimmable lighting loads.

    Add to cart
  • Rako RAK4R Relay Control Rack

    £609.60

    Rak4R is a 4 Channel twin relay control unit for control of up to 4 curtain or blind motors. Configurable to suit most motor types such as 240V roller, Venetian or Roman blinds, curtain tracks or low voltage motors. Relays are isolated and can be used to provide volt-free contact closures from the Rako network for nonmotor control applications.

    Add to cart
  • Rako RAK4T Trailing Edge Dimming Rack

    £578.40

    The Rako RAK4T is a four channel dimming rack, designed to be wall mounted in an electrical cupboard. Incorporating the latest dimming technology. Hybrid IGBT design enables leading and trailing edge control of lighting loads, quietly and smoothly. The dimmer has four separated dimming channels that can control a total of 2400w/2000va of trailing edge dimmable lighting loads. In parallel with the 4 dimmer channel is a separate switched relay channel for LEDs or Fans or other non dimmed loads. The RAK-4 requires a separate RF receiver (RxLink) which connects using standard CAT5 RJ45 sockets. Controlled from any Rako RAKOM RF device, for example the RCP07 or RCM070 push button RF wallplates.

    Add to cart
  • Rako RAK8 Modular Dimming / Control Rack

    £417.60

    New Rako RAK8 Modular  coming soon – Due May 2017

    The RAKO RAK8-MB is a 8 Channel modular dimming rack motherboard. It has 8 individual channel “slots” that allow complete flexibility of controlled loads when fitted with either of the WMT-400, WDA-600, WMS600 or WM-CUB control cards (these are an additional purchase) The RAK8 unit is stackable with other RAK8 units. It requires a RAK-LINK for wired systems or RX-LINK for wireless controlled systems.

    Add to cart
  • Rako RAKLink

    £390.00

    The RAK-LINK provides an isolated link between the RAK4 dimmer units and wired RAKOM products. The unit also includes a heavy duty 15v dc power supply for the RAKOM network. Connection for the CAT5 is by 8 way punch down terminals. This allows for a daisy chain configuration of the RAKOM wired network. Where a ‘star’ or ‘home-run’ configurations are required the use of the RAK-STAR unit is needed. Three RJ11 programming sockets within the unit allows system programming using the RASOFT software suite and connection of other RAKOM accessories such as the WA-BRIDGE interface.

    Add to cart
  • Rako RAKStar

    £322.80

    The Rako Rak-Star is a wired connection unit allowing multiple CAT5 ‘star’ or ‘home run’ cables to be connected to the Rako wired network, generally for when the installer prefers to wire control panels in this fashion. The RAKStar also allows each ‘leg’ to be isolated making cabling fault identification easier. No additional power supply is required, the unit is fed from the RAK-LINK units via either the RJ11 sockets or the CAT5 network.

    Add to cart
  • Rako RAMPI Interface and RASOFT software for PC

    £151.20

    The Rako RAMPI USB Programming Interface is designed to operate with the Rako Rasoft Pro programming software the RAMPI allows easy programming of a wireless Rako system. The RAMPI also supports NFC (Near Field Communication) programming of Rako’s NFC devices such as the RNC control panels and RCI interface modules.

    Add to cart
  • Rako RAMVR For single mains-voltage or volt-free input

    £138.60

    The Rako RAMVR replaces its predecessor the RAVFR, it is a Wireless system interface for a single mains-voltage or volt-free input. Ideal for interfacing with a mains
    indoor or outdoor PIR sensor. The RAMVR can be used where a RAPIR is not suitable such as in external installations. It also allows sensors using other detection methods such as break-beam or microwaves to be used.

    The RAMVR is mains powered. Programming is required using Rasoft Pro for advanced functionality.

    Add to cart
  • Rako RAPIR Wireless PIR with Integrated Daylight Sensor

    £187.20

    The Rako RAPIR is a mains powered ceiling-mounted PIR motion detector with a 360° sensor pattern. The unit is ideally suited to office and residential applications where automatic scene selection is required.

    Add to cart
  • Rako RAVIR Infrared to RF interface module

    £201.60

    The Rako RAVIR is designed to be located out of sight along with other audiovisual sources it creates a link between infrared based controllers and Rako RF based receivers. It is an infrared to RF interface to convert infrared control signals to Rakom RF.

    Add to cart
  • Rako RCM-020 2 Button Wireless Keypad Module

    £144.00

    The Rako RCM-020 Wireless keypad module is compatible with the RLF and RVF series coverplates. It is a wireless 2 button control module that arrives pre configured for a scene 1 on, and off option. As the unit is wireless it can be mounted anywhere on a rigid surface you will need the coverplate kit for mounting. It is also suitable for all switch accessory plates that use a 50x50mm grid and cover plate arrangement.

     

    Add to cart
  • Rako RCM-070 7 Button Wireless Keypad Module

    £144.00

    The RCM070 push button control module comes pre-configured for selecting 4 scenes, off and master raise & lower. The wall plate controllers are designed to be mounted anywhere, be it flush mounting to UK back-boxes or simply surface mounted to any flat surface using the pattress provided. It is also suitable for all switch accessory plates that use a 50x50mm grid and cover plate arrangement

     

    Add to cart
  • Rako RCM-100 10 Button Wireless Keypad Module

    £144.00

    The RCM100 push button control module comes pre-configured for selecting 7 scenes, off and master raise & lower. The wall plate controllers are designed to be mounted anywhere, be it flush mounting to UK back-boxes or simply surface mounted to any flat surface using the pattress provided. It is also suitable for all switch accessory plates that use a 50x50mm grid and cover plate arrangement.

     

    Add to cart
  • Rako RDA 800 Universal Control Module

    £170.40

    A compact 800VA RF dimmer for 1-10V, DALI and DSI controllable loads. Connected in-line before the first lighting fitting the RMS800 enables switching of up to 800VA of 0-10V, DALI and DSI controllable loads such as LED drivers and dimmable fluorescent ballasts. Controlled from any Rako Rakom RF device, for example the RCP/RCM push button RF wall-plates.

    Add to cart
  • Rako RLED150CV1 Wireless LED Dimmer

    £212.40

    The Rako RLED150CV1 wireless Single channel 150w Dimmer is a compact single channel 150W constant voltage LED dimmer with in-built RF receiver and Rako processor for control of single channel constant voltage LED tape light.

    The Rako RLED150CV1 is programmed using either a RCM/RCP RF wallplate or the RASOFT PC software suite, the unit stores the house, room and channel address plus 16 preset scene levels in non volatile memory. The RLED150CV1 dimmer can be controlled from any Rako transmitter such as RCM/RCP wallplates, RAH hand helds and Bridge modules and forms the foundation of any Rako scene-set system. For more information on dimming LEDs refer to Rako’s application sheet ‘Controlling LED Lighting With Rako Dimmers and Modules’.

    Add to cart
  • Rako RLED20CC3 3 Channel Constant Current Dimmer (RGB)

    £168.00

    The Rako RLED20CC3 is a 3x 20w constant current LED driver with in-built RF receiver and Rako processor. Designed to control 3 channel constant current LED fittings with selectable outputs of 350, 500, 600 and 700mA.

    When the RLED20CC3 is used with 3 colour (eg RGB) light fittings each colour is assigned a channel and can be discretely adjusted allowing complete colour mixing. Simple colour cycling is controlled using the raise/lower buttons from any Rako controller.

    Add to cart
  • Rako RLED30 Slave Colour Booster

    £123.60

    For larger systems Rako RLED30 Slave would be used to extend or amplify your desired circuit. The RLED30 Slave is a 4 channel colour booster to be used with the RLED30CV4.

    The RLED30Slave is designed to work with RLED30CV4 modules where the length of tape exceeds the capacity of the RLED30CV4. The RLED30Slave is fed the output signal from the RLED30CV4 and allows a further length of tape to be controlled from the same base RLED30CV4 unit. This method of slaving is more cost effective than having multiple RLED30CV4 units but importantly allows colour cycling to remain in sync where multiple RLED30CV4 units may drift due to slight differences in the internal clocks.

    Add to cart
  • Rako RLED30CV4 4 Channel Wireless (RGBW) Driver/Controller

    £168.00

    The RLED30-CV4 is a wireless 4 channel, 30w/channel (Red, Green, Blue & White) constant voltage colour controller, For larger systems the Rako RLED30 Slave would be used to extend or amplify your desired circuit.

    A compact 4 channel 30W per channel, constant voltage LED dimmer with in-built RF receiver and Rako processor for control of 4 channel constant voltage LED fittings.

    Add to cart
  • Rako RLED45CC1 Wireless 45W Constant Current Dimming Module

    £142.80

    The Rako RELD45CC1 is a compact 45W constant current LED dimmer. Designed as part of the Rako Wireless range with built-in RF receiver and Rako processor for constant current LED fittings. To suite differing loads the RLED45CC1 has five selectable outputs of 350, 500, 600, 700 and 1000mA and a voltage range of 3-45V DC.

    Add to cart
  • Rako RLED75CV1 Wireless Single Channel 75w Dimmer

    £142.80

    The Rako RLED75CV1 is An in-line RF 75w single channel, constant voltage dimming LED driver. The compact single channel 75W constant voltage LED dimmer with in-built RF receiver and Rako processor for control of single channel constant voltage LED fittings. Controlled from any Rako Rakom device, e.g. RCP/RCM wall plates or Bridge interface units.

    Add to cart
Show: