£177.60 (incl. VAT)
-
Rako RLM FocusSB Wireless Cover Plate White Metal
£50.40Rako now offer a range of FocusSB Morpheous Cover Plates that are available in a choice of 7 standard colours and 6 custom finishes. The Rako RLM FocusSB Morpheous Cover Plate has soft rounded edges and corners and can be ordered to suit button configurations of 2, 3, 7, 6 and 10 buttons
This screwless cover plate is compatible with the wireless range. The plate is 88 x 88mm and houses a push button module (sold separately)
The module and cover plate are suitable for flush mount fixing into a standard 25mm UK back box, using the low profile grid supplied. The depth of the cover plate is only 3mm, so gives a beautiful soft flush finish once installed.
-
Rako RLM-xxx-MB FocusSB Wireless Cover Plate Matt Black
£61.20Rako now offer a range of FocusSB cover plates come in a range of 7 standard colours and 6 custom finishes The RLM Cover Plates are compatible with wired and wireless installations. This RLM Cover Plate in the FocusSB Morpheous range is shown in a Matt Black finish. It features soft rounded edges and corners and can be ordered to suit button configurations of 2, 3, 7, 6 and 10 buttons. Custom engraved buttons are also available..
This screwless cover plate is compatible with the wireless range. The plate is 88 x 88mm and houses a push button module (sold separately)
The module and cover plate are suitable for flush mount fixing into a standard 25mm UK back box, using the low profile grid supplied. The depth of the cover plate is only 3mm, so gives a beautiful soft flush finish once installed.
-
Rako RML 500w Leading Edge Dimmers
£177.60The Rako RML-500 (500w) RF Dimmer is designed to fit through the aperture of a standard low voltage down light fitting. The dimmer is connected in-line before the first light fitting, to enable dimming of up to 500w/250w of leading edge dimmable loads.
-
Rako RML-1200 Leading Edge 1200W Wireless Dimmer Module
£273.60For Flexible lighting control the Rako RML-1200 Leading Edge 1200W Wireless Dimmer Module is an inductive dimmer thaT can control up to 1200 watts of mains dimmable lighting loads. The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP rated enclosure.
-
Rako RMR-VF Wireless – 10 Volt-free Contact Closure Inputs
£273.60The Rako RMR-VF is an interface unit to convert volt-free contact signals into Rako wireless RAKOM messages. This unit creates an interface between volt-free contact or DC logic inputs and Rako RF based receivers. The unit accepts up to 10 contact closures which can be mapped using RASOFT Pro to mimic keypad presses.
-
Rako RMS-800 Switching Module
£128.40The Rako RMS-800 switching module can control up to 800 watts of mains non dimmable lighting loads. The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP rated enclosure. The robust microprocessor design combines reliable switching with dynamic safety features such as auto-resetting over current and voltage surge protection. The RMS-800 switch module can be controlled from any Rako transmitter such as RCP/RCM wallplates, RAH hand helds, MB1 timeclocks and forms the foundation of any Rako scene-set system
-
Rako RMT-1200 Trailing Edge 1200W Wireless Dimmer Module
£273.60The Rako RMT-1200 is a compact 1200W RF dimmer designed to be mounted in a ceiling void using an access panel or wall mounted in an electrical cupboard. The primary purpose of the RMT-1200 Trailing Edge Module is for dimming GU10 LED lamps, tungsten, low-voltage halogen and other trailing edge dimmable loads.
-
Rako RMT-500 Trailing Edge Dimmer
£177.60The Rako RMT-500 is a trailing edge 500W ceiling-mount dimmer.The RMT500 uses trailing edge dimming technology to maximise the performance of most GU10 dimmable LED down-lights (refer to Rako Controls for compatibility and maximum loadings). The RMT500 is also the recommended dimmer for GU10 tungsten lamps due to its in-built short circuit protection, necessary with this style of lamps.
-
Rako RMT-PILL Trailing Edge 250W Back Box Dimmer
£177.60The Rako RMT-PILL is designed to offer flexible control and fits in to a standard UK or European back-box. A compact 250W RF dimmer designed to be located in a standard UK or European backbox. The RMT-Pill can be used either with or without a neutral allowing it to be used with dedicated wiring or retrofit into a standard wiring situation. Trailing edge technology for quiet reliable dimming of any non-inductive load when used with a neutral or tungsten GLS and tungsten halogen GU10 style lamps when used without. Controlled from any Rako Rakom device or simple contact closure input using a momentary push switch.
-
Rako RNC-020 Wireless NFC 2 Button Keypad module
£193.20The RNC-020, 2 button control module is programmable via Rako’s patented NFC (Near Field Communication) technology allowing each of the buttons to trigger a single or multiple commands. Each input is fully customisable, can be addressed to separate Rako Rooms or Channels and activate on press, or release which gives a ‘Press and Hold’ function.
-
Rako RNC-070 Wireless NFC 7 Button Keypad module
£193.20The RNC push button control module is programmable via Rako’s patented NFC (Near Field Communication) technology allowing each of the buttons to trigger a single or multiple commands. Each input is fully customisable, can be addressed to separate Rako Rooms or Channels and activate on press, or release which gives a ‘Press and Hold’ function.
-
Rako RNC-100 Wireless NFC 10 Button Keypad module
£193.20The RNC wireless push button wall plate controller with 4 scenes, off and master raise and lower buttons. Customisable and programmable via NFC (Near Field Communication).
The RNC-100, 10 button control module is programmable via Rako’s patented NFC (Near Field Communication) technology allowing each of the buttons to trigger a single or multiple commands. Each input is fully customisable, can be addressed to separate Rako Rooms or Channels and activate on press, or release which gives a ‘Press and Hold’ function.
-
Rako RP-EOS-6 Cover Plate – Antique Brass
£74.40The Rako RP-EOS-6 Cover plate in Antique Brass can be used with a 6-Button wireless EOS wall plate controller RK-EOS-6, with 3 scenes, off and master raise and lower buttons.
-
Rako RP-EOS-6 Cover Plate – Matt Black
£74.40The Rako RP-EOS-6 Cover plate in Matt Black can be used with a 6-Button wireless EOS RK-EOS-6 wall plate controller with 3 scenes, off and master raise and lower buttons.
-
Rako RP-EOS-6 Cover Plate – Polished Brass
£74.40The Rako RP-EOS-6 Cover plate in Satin Chrome can be used with a 6-Button wireless EOS wall plate controller RK-EOS-6, with 3 scenes, off and master raise and lower buttons.
-
Rako RP-EOS-6 Cover Plate – Polished Chrome
£74.40The Rako RP-EOS-6 Cover plate in Polished Chrome can be used with a 6-Button wireless EOS wall plate controller RK-EOS-6, with 3 scenes, off and master raise and lower buttons.
-
Rako RP-EOS-6 Cover Plate – Satin Chrome
£74.40The Rako RP-EOS-6 Cover plate in Satin Chrome can be used with a 6-Button wireless EOS wall plate controller RK-EOS-6, with 3 scenes, off and master raise and lower buttons.
-
Rako RP-EOS-6 Cover Plate – White
£74.40The Rako RP-EOS-6 Cover plate in white can be used with a 6-Button wireless EOS wall plate controller RK-EOS-6, with 3 scenes, off and master raise and lower buttons.
-
Rako RP-EOS-6 Cover Plate – Wireless System
£74.40The Rako RP-EOS range is a wireless 6 button, push button Cover Plate for the RK-EOS-6 control module.
The RP-EOS is the newest cover plate and control module range from Rako. The all new new EOS push button control modules are available as wired or wireless NFC. Built around an all metal screwless flush fascia design, this elegant range offers specifiers and end clients a clean uncluttered look for their projects with six configurable buttons offering scene, curtain/blind and audio control options.
Click on the drop down menu to make your choice of finish
-
Rako RSR-DALI Wireless Receiver Module
£477.60The Rako RSR-DALI is a wireless receiver module with outputs to control 15 channels of addressable DALI fittings in a single Rako Room.
-
Rako RSR-DMX 15 Channel DMX Control Module
£294.00Meet the new Rako RSR-DMX 15 Channel DMX Control module, it is a wireless 15 channel DMX controller for DMX controlled LED and other DMX light fixtures such as colour changing LED drivers and fibre optic projectors.
Designed to be connected to the Rako Rakom wireless network and be controlled by any Rako wireless transmitter device such as the RCM wall plates or RA/RTC Bridges.
-
Rako RVF-020-MSS Faceplate for RCM and RNC Series Keypads
£39.60The Rako RVF-020, Mirrored Stainless Steel, 2 Button Screwed Cover Plate Kit, is suitable for Wireless Rako RNC-020 and RCM-020 Keypad Controller Modules only.
Keypads are sold available separately
-
Rako RVF-020-PB Faceplate for RCM and RNC Series Keypads
£42.00The Rako RVF-020,Polished Brass, 2 Button Screwed Cover Plate Kit, is suitable for Wireless Rako RNC-020 and RCM-020 Keypad Controller Modules only.
Keypads are sold available separately
-
Rako RVF-020-SS Faceplate for RCM and RNC Series Keypads
£31.20The Rako RVF-020, 2 Button Screwd Cover Plate Kit, is suitable for Wireless Rako RNC-020 and RCM-020 Keypad Controller Modules only. The 2 button RVF-070 coverplate is available in White Metal,Brushed Stainless Steel, Mirrored Stainless Steel and Polished Brass finish to suit your decor.
Click on the drop down to choose your colour option.
Keypads are sold available separately
