Show:
  • Rako Pre-Programming Module Service

    £0.00

    CyberSelect now offer a Rako Pre-Programming Service for Rako Lighting Control modules purchased from CyberSelect.

    We have an experienced installation team, who complete installs every week. These installations range from larger complex lighting systems, integrated lighting within a Smart Home, to small and simple Rako Lighting Control both Wired Systems and Wireless Systems working seamlessly together. They can assist with pre-programming of your modules for your Rako Lighting Control and Home Automation System.

    Read more
  • Rako RACUB Curtain and Blind Control Module

    £206.40

    The Rako RACUB is a compact dual relay RF switching module. Ideal for integrating motorised curtains, blinds and projector screens with the lighting control system. Controlled from any Rako Rakom RF device, for example the RPS030 /060 or RCM030 / 060 three or six button RF wall plates.

    Add to cart
  • Rako RACUB-24DC Curtain and Blind Module

    £206.40

    The Rako RACUB-24DC is a curtain and blind module for use with 24V motors requiring polarity reversing control.

    Add to cart
  • Rako RACUB-2L Curtain and Blind Module

    £206.40

    The Rako RACUB2L is a Curtain and Blind module internally wired for dedicated use with 240V motors with twin live connections (Up and Down).

    Add to cart
  • Rako RAK4F Switching and 0-10v Control Rack

    £720.00

    A four channel dimming rack, designed to be wall mounted in an electrical cupboard. Incorporating the latest dimming technology. Each of the four channels can independantly control 0-10v, DSI or DALI dimmable lighting load or switched circuits. The dimmer has four seperate dimming channels that can control a total of 2400w of lighting.

    Add to cart
  • Rako RAK4R Relay Control Rack

    £768.00

    Rak4R is a 4 Channel twin relay control unit for control of up to 4 curtain or blind motors. Configurable to suit most motor types such as 240V roller, Venetian or Roman blinds, curtain tracks or low voltage motors. Relays are isolated and can be used to provide volt-free contact closures from the Rako network for nonmotor control applications.

    Add to cart
  • Rako RAK4T Trailing Edge Dimming Rack

    £750.00

    The Rako RAK4T is a four channel dimming rack, designed to be wall mounted in an electrical cupboard. Incorporating the latest dimming technology. Hybrid IGBT design enables leading and trailing edge control of lighting loads, quietly and smoothly. The dimmer has four separated dimming channels that can control a total of 2400w/2000va of trailing edge dimmable lighting loads. In parallel with the 4 dimmer channel is a separate switched relay channel for LEDs or Fans or other non dimmed loads. The RAK-4 requires a separate RF receiver (RxLink) which connects using standard CAT5 RJ45 sockets. Controlled from any Rako RAKOM RF device, for example the RCP07 or RCM070 push button RF wallplates.

    Add to cart
  • Rako RAK8-MB Modular Dimming / Control Rack

    £506.40

    The RAKO RAK8-MB is a 8 Channel modular dimming rack motherboard. It has 8 individual channel “slots” that allow complete flexibility of controlled loads when fitted with either of the WMT-400, WDA-600, WMS600 or WM-CUB control cards (these are an additional purchase) The RAK8 unit is stackable with other RAK8 units. It requires a RAK-LINK for wired systems or RX-LINK for wireless controlled systems.

    Add to cart
  • Rako RAKLink

    £471.60

    The RAK-LINK provides an isolated link between the RAK4 dimmer units and wired RAKOM products. The unit also includes a heavy duty 15v dc power supply for the RAKOM network. Connection for the CAT5 is by 8 way punch down terminals. This allows for a daisy chain configuration of the RAKOM wired network. Where a ‘star’ or ‘home-run’ configurations are required the use of the RAK-STAR unit is needed. Three RJ11 programming sockets within the unit allows system programming using the RASOFT software suite and connection of other RAKOM accessories such as the WA-BRIDGE interface.

    Add to cart
  • Rako RAKStar

    £391.20

    The Rako Rak-Star is a wired connection unit allowing multiple CAT5 ‘star’ or ‘home run’ cables to be connected to the Rako wired network, generally for when the installer prefers to wire control panels in this fashion. The RAKStar also allows each ‘leg’ to be isolated making cabling fault identification easier. No additional power supply is required, the unit is fed from the RAK-LINK units via either the RJ11 sockets or the CAT5 network.

    Add to cart
  • Rako RAMPI Interface and RASOFT software for PC

    £171.60

    The Rako RAMPI USB Programming Interface is designed to operate with the Rako Rasoft Pro programming software the RAMPI allows easy programming of a wireless Rako system. The RAMPI also supports NFC (Near Field Communication) programming of Rako’s NFC devices such as the RNC control panels and RCI interface modules.

    Add to cart
  • Rako RAMVR For single mains-voltage or volt-free input

    £156.00

    The Rako RAMVR replaces its predecessor the RAVFR, it is a Wireless system interface for a single mains-voltage or volt-free input. Ideal for interfacing with a mains
    indoor or outdoor PIR sensor. The RAMVR can be used where a RAPIR is not suitable such as in external installations. It also allows sensors using other detection methods such as break-beam or microwaves to be used.

    The RAMVR is mains powered. Programming is required using Rasoft Pro for advanced functionality.

    Add to cart
  • Rako RAPIR Wireless PIR with Integrated Daylight Sensor

    £217.20

    The Rako RAPIR is a mains powered ceiling-mounted PIR motion detector with a 360° sensor pattern. The unit is ideally suited to office and residential applications where automatic scene selection is required.

    Add to cart
  • Rako RDA 800 Universal Control Module

    £196.80

    A compact 800VA RF dimmer for 1-10V, DALI and DSI controllable loads. Connected in-line before the first lighting fitting the RMS800 enables switching of up to 800VA of 0-10V, DALI and DSI controllable loads such as LED drivers and dimmable fluorescent ballasts. Controlled from any Rako Rakom RF device, for example the RCP/RCM push button RF wall-plates.

    Add to cart
  • Rako RLED150CV1 Wireless LED Dimmer

    £243.60

    The Rako RLED150CV1 wireless Single channel 150w Dimmer is a compact single channel 150W constant voltage LED dimmer with in-built RF receiver and Rako processor for control of single channel constant voltage LED tape light.

    The Rako RLED150CV1 is programmed using either a RCM/RCP RF wallplate or the RASOFT PC software suite, the unit stores the house, room and channel address plus 16 preset scene levels in non volatile memory. The RLED150CV1 dimmer can be controlled from any Rako transmitter such as RCM/RCP wallplates, RAH hand helds and Bridge modules and forms the foundation of any Rako scene-set system. For more information on dimming LEDs refer to Rako’s application sheet ‘Controlling LED Lighting With Rako Dimmers and Modules’.

    Add to cart
  • Rako RLED30 Slave Colour Booster

    £145.20

    For larger systems Rako RLED30 Slave would be used to extend or amplify your desired circuit. The RLED30 Slave is a 4 channel colour booster to be used with the RLED30CV4.

    The RLED30Slave is designed to work with RLED30CV4 modules where the length of tape exceeds the capacity of the RLED30CV4. The RLED30Slave is fed the output signal from the RLED30CV4 and allows a further length of tape to be controlled from the same base RLED30CV4 unit. This method of slaving is more cost effective than having multiple RLED30CV4 units but importantly allows colour cycling to remain in sync where multiple RLED30CV4 units may drift due to slight differences in the internal clocks.

    Add to cart
  • Rako RLED30CV4 4 Channel Wireless (RGBW) Driver/Controller

    £195.60

    The RLED30-CV4 is a wireless 4 channel, 30w/channel (Red, Green, Blue & White) constant voltage colour controller, For larger systems the Rako RLED30 Slave would be used to extend or amplify your desired circuit.

    A compact 4 channel 30W per channel, constant voltage LED dimmer with in-built RF receiver and Rako processor for control of 4 channel constant voltage LED fittings.

    Add to cart
  • Rako RLED45CC1 Wireless 45W Constant Current Dimming Module

    £174.00

    The Rako RELD45CC1 is a compact 45W constant current LED dimmer. Designed as part of the Rako Wireless range with built-in RF receiver and Rako processor for constant current LED fittings. To suite differing loads the RLED45CC1 has five selectable outputs of 350, 500, 600, 700 and 1000mA and a voltage range of 3-45V DC.

    Add to cart
  • Rako RLED75CV1 Wireless Single Channel 75w Dimmer

    £165.60

    The Rako RLED75CV1 is An in-line RF 75w single channel, constant voltage dimming LED driver. The compact single channel 75W constant voltage LED dimmer with in-built RF receiver and Rako processor for control of single channel constant voltage LED fittings. Controlled from any Rako Rakom device, e.g. RCP/RCM wall plates or Bridge interface units.

    Add to cart
  • Rako RML 500w Leading Edge Dimmers

    £164.40

    The Rako RML-500 (500w) RF Dimmer is designed to fit through the aperture of a standard low voltage down light fitting. The dimmer is connected in-line before the first light fitting, to enable dimming of up to 500w/250w of leading edge dimmable loads.

    Add to cart
  • Rako RML-1200 Leading Edge 1200W Wireless Dimmer Module

    £253.20

    For Flexible lighting control the Rako RML-1200 Leading Edge 1200W Wireless Dimmer Module is an inductive dimmer thaT can control up to 1200 watts of mains dimmable lighting loads. The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP rated enclosure.

    Add to cart
  • Rako RMR-VF Wireless – 10 Volt-free Contact Closure Inputs

    £241.20

    The Rako RMR-VF is an interface unit to convert volt-free contact signals into Rako wireless RAKOM messages. This unit creates an interface between volt-free contact or DC logic inputs and Rako RF based receivers. The unit accepts up to 10 contact closures which can be mapped using RASOFT Pro to mimic keypad presses.

    Add to cart
  • Rako RMS-800 Switching Module

    £118.80

    The Rako RMS-800 switching module can control up to 800 watts of mains non dimmable lighting loads. The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP rated enclosure. The robust microprocessor design combines reliable switching with dynamic safety features such as auto-resetting over current and voltage surge protection. The RMS-800 switch module can be controlled from any Rako transmitter such as RCP/RCM wallplates, RAH hand helds, MB1 timeclocks and forms the foundation of any Rako scene-set system

    Add to cart
  • Rako RMT-1200 Trailing Edge 1200W Wireless Dimmer Module

    £253.20

    The Rako RMT-1200 is a compact 1200W RF dimmer designed to be mounted in a ceiling void using an access panel or wall mounted in an electrical cupboard. The primary purpose of the RMT-1200 Trailing Edge Module is for  dimming GU10 LED lamps, tungsten, low-voltage halogen and other trailing edge dimmable loads.

    Add to cart
Show: