The Rako RAK4L is a four channel dimming rack, designed to be wall mounted in an electrical cupboard. Incorporating the latest dimming technology. The dimmer has four separate dimming channels that can control a total of 4800w/4000va of leading egde dimmable lighting loads.
Rak4R is a 4 Channel twin relay control unit for control of up to 4 curtain or blind motors. Configurable to suit most motor types such as 240V roller, Venetian or Roman blinds, curtain tracks or low voltage motors. Relays are isolated and can be used to provide volt-free contact closures from the Rako network for nonmotor control applications.
The Rako RAK4T is a four channel dimming rack, designed to be wall mounted in an electrical cupboard. Incorporating the latest dimming technology. Hybrid IGBT design enables leading and trailing edge control of lighting loads, quietly and smoothly. The dimmer has four separated dimming channels that can control a total of 2400w/2000va of trailing edge dimmable lighting loads. In parallel with the 4 dimmer channel is a separate switched relay channel for LEDs or Fans or other non dimmed loads. The RAK-4 requires a separate RF receiver (RxLink) which connects using standard CAT5 RJ45 sockets. Controlled from any Rako RAKOM RF device, for example the RCP07 or RCM070 push button RF wallplates.
The RAK-LINK provides an isolated link between the RAK4 dimmer units and wired RAKOM products. The unit also includes a heavy duty 15v dc power supply for the RAKOM network. Connection for the CAT5 is by 8 way punch down terminals. This allows for a daisy chain configuration of the RAKOM wired network. Where a ‘star’ or ‘home-run’ configurations are required the use of the RAK-STAR unit is needed. Three RJ11 programming sockets within the unit allows system programming using the RASOFT software suite and connection of other RAKOM accessories such as the WA-BRIDGE interface.
The Rako TCM Timeclock is an upgrade module. The TCM is a time-clock and advanced programming upgrade module that can be connected to a RA-Bridge or a WA-Bridge. Once programmed, the TCM will allow automatic timed events for example, holiday simulation, macros, mapping and other advanced functions. This is an excellent module for remote location control of your home events for security and simulation of habitation.