Product Description
The Rako RELD45CC1 is a compact 45W constant current LED dimmer. Designed as part of the Rako Wireless range with built-in RF receiver and Rako processor for constant current LED fittings. To suite differing loads the RLED45CC1 has five selectable outputs of 350, 500, 600, 700 and 1000mA and a voltage range of 3-45V DC.
Like all Rako Wireless modules the RLED45CC1 is designed to fit through a ceiling cut-out of 50mm diameter or greater, allowing them to be mounted behind down lighter fittings.
The dimmer module is designed to be connected in-line before the first fitting and can control up to 13 LEDs in series (some fittings may use multiple LEDs) with a maximum wattage of 45W. The RELD45CC1 is powered from a suitable DC power supply to provide an adequate forward voltage. The RAPSU48 is recommended.
Programmed using either an RCM RF wall-plate or the RASOFT software suite, the unit stores the house, room and channel address plus 16 pre-set scene levels in non volatile memory.
The RLED45CC1 dimmer can be controlled from any Rako wireless controller such as RCM or RNC wall keypads, and Rako Bridge interface modules.
This Rako wireless 48W constant current dimming module can be used for exterior lighting control provided it is installed using a weatherproof IP rated enclosure housing.
Reviews
There are no reviews yet.