View cart “Rako RMS-800 Switching Module” has been added to your cart.
Rako RMT500 4
Rako RMT-500 Trailing Edge Dimmer

£177.60 (Inc. VAT)

£148.00 (Exc. VAT)

In Stock

SKU: RMT-500
Quick Overview

The Rako RMT-500 is a trailing edge 500W ceiling-mount dimmer.The RMT500 uses trailing edge dimming technology to maximise the performance of most GU10 dimmable LED down-lights (refer to Rako Controls for compatibility and maximum loadings). The RMT500 is also the recommended dimmer for GU10 tungsten lamps due to its in-built short circuit protection, necessary with this style of lamps.

Qty:
Compare

Product Description

The RMT-500 is a 500W RF dimmer designed to fit through a standard down-light cut-out. Trailing edge dimming technology gives smooth quiet dimming of electronic transformer fed loads and maximises dimming performance of most GU10 LED down-lights. The dimmer is connected in-line before the first lighting fitting to enable dimming of up to 500W of trailing edge dimmable loads. Controlled from any Rako Rakom RF device, for example the RCP/RCM push button RF wall-plates.

Designed to fit in a ceiling void or cupboard, the RMT500 trailing edge dimmer can control up to 500 watts of mains dimmable lighting loads. The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP rated enclosure. The RMT500 uses trailing edge dimming technology to maximise the performance of most GU10 dimmable LED down-lights. The RMT500 is also the recommended dimmer for GU10 tungsten lamps due to its in-built shortcircuit protection, necessary with this style of lamps.

16 Scene memory capacity, can be fully integrated into Rako wired systems. Easy set-up and manual On/Off control using the set-up button. Full rising clamp terminals and mounting bracket for easy installation.

NOTE – THE RMT500 IS NOT SUITABLE FOR USE WITH INDUCTIVE OR WIRE-WOUND LOADS.

Programmed using either an RCM/RCP RF wall-plate or RASOFT PC software suite, the RMT500 stores the House, Room and Channel address plus 16 preset scene levels in a non-volatile memory. The RMT500 dimmer can be controlled from any Rako transmitter such as RCM/RCP wallplates, RAH hand-helds and Bridge modules and forms the foundation of any Rako wireless scene-set system.

Features

  • 500W Trailing-edge dimmer
  • Designed to fit into Standard downlight cut-out
  •  Smooth and Quiet dimming of electronic transformer fed loads
  • Short circuit proof for GU10 lamps
  • Internal aerial

Specification

Dimensions 138x46x40mm
Input Supply 230V AC +/-10% 50Hz
Weight 120g
Housing UL V0 material
Climate Range Temperature +2C to +40C Humidity +5% to 95% non condensing
Connections 3 way screw terminals for mains power
Protection Auto resetting over current protection Auto thermal shutdown Voltage surge protection
Load Types Mains Dimmable LEDs Incandescent mains voltage lamps Tungsten halogen GU10 lamps Trailing edge dimmable LV transformers Trailing edge dimmable cold cathode
Minimum Load 1w
Maximum Load 500VA refer to Rako when dimming GU10 style LEDs
Terminal Sizes 4mm2
Standards Emissions – EN61000-6-3 : 2001 Immunity – EN61000-6-1 : 2001
Communication Rakom coded fm radio, 433.9MHz
Memory Flash memory non volatile

Tech Info

RMT-500 Data Tech

RMT-500 Instruction Manual

RMT 500 Pour les Données Techniques

Aperçu Rako Éclairage Contrôle

Rako Lighting Control vous donne la possibilité de définir des scènes d’éclairage belles et fonctionnelles autour de votre maison, qui sont contrôlées par des claviers montés dans des plaques de façade de style contemporain. Rako Lighting Control maximise l’efficacité énergétique de vos systèmes d’éclairage. Il vous permet également de contrôler à distance votre éclairage et vos stores.

Produit RMT 500

Un gradateur RF en ligne pour les lampes à LED GU10, le tungstène, l’halogène basse tension et d’autres charges dimmables en bord de fuite.

Un variateur RF compact de 500 W conçu pour s’adapter à une coupure de lumière standard. La technologie de gradation du bord de fuite offre une gradation douce et silencieuse des charges alimentées par transformateur électronique et maximise les performances de gradation de la plupart des downlights à LED GU10.

Programmé à l’aide d’une plaque murale RCM ou du logiciel RASOFT Pro, l’appareil stocke l’adresse de la maison, de la pièce et du canal ainsi que 16 niveaux de scène prédéfinis dans une mémoire non volatile.

Dear Customer, We will be closed from 20th March 2024 until 2nd April 2024. There will be no goods dispatched during this period. Please accept my apologies for any inconvenience this causes. Dismiss

X