Product Description
The Rako WLED75CV1 is designed for use with single channel constant voltage LED fittings and single channel LED tape light. Maximum wattage of 75W for 12V d.c. fittings or 150w for 24V d.c. fittings. Requires a suitable external d.c. power supply (normally the power supply that would be supplied with the fitting for a non-dimming application).
Programmed using the RASOFT PC software suite, the unit stores the house, room and channel address plus 16 preset scene levels in non
volatile memory. Connection to the Rakom wired network can be via the RJ11 lead, plugging into a RAKLink or RAKStar unit. Alternatively a WPCON or WPCONC unit can be used as a remote plug in connection point.
Installing a Bridge or WRB100 as part of the wired system will allow the WLED75CV1 to receive commands from wireless devices as part of a
“combined” or “hybrid” system.
For more information on dimming LEDs refer to Rako’s application sheet ‘Controlling LED Lighting With Rako Dimmers and Modules‘.
If the WLED75 or WLED150CV1 is not located next to the central RAKLink / Racks then you will require the WP-Con accessory plate or the WP-Con-C ceiling interface for the connection into the RAKOM wired network.
Controlled from any Rako Wired device, e.g. WCM, WAPIR or from wireless devices via a WA/WTC-Bridge or WRB100.
Designed for use with single channel constant voltage LED fittings and single channel LED tape light. Maximum wattage of 75W for 12V d.c. fittings or 150w for 24V d.c. fittings. Requires a suitable external d.c. power supply (normally the power supply that would be supplied with the fitting for a non-dimming application).
Reviews
There are no reviews yet.