Russound SS-6
Russound 6 Pair Speaker Switch Selector, Single Source

£169.99 (Inc. VAT)

£141.66 (Exc. VAT)

In Stock

SKU: SS-6.2
Quick Overview

The Russound SS-6.2 speaker selectors permit either four or six pair of speakers to be turned on and off through individual switches on the front panel, it also provides overload protection and long-term reliability.

Multiple pairs may be engaged simultaneously if desired. When multiple pairs are engaged, impedance matching protection must be employed to protect the amplifier from damage.The SS-6.2 have this impedance matching protection built in, when selected by the Impedance switch on the rear panel.

Qty:
Compare

Product Description

The Russound SS-6.2 speaker selectors permit either four or six pair of speakers to be turned on and off through individual switches on the front panel. Multiple pairs may be engaged simultaneously if desired. When multiple pairs are engaged, impedance matching protection must be employed to protect the amplifier from damage. The SS-6.2 have this impedance matching protection built in, when selected by the Impedance switch on the rear panel. They also have built-in circuit overload protection that disengages the amplifier signal if it exceeds the limits of the selector. After being tripped, the amplifier must be shut off before the SS-6.2 will automatically reset itself. If this occurs, check all system components for proper connections and use.

The Russound SS-4.2 speaker switch can be used in one of two mode settings:

Impedance matching mode This method of impedance matching uses the SS-4.2 internal high-powered resistors to eliminate the need for external impedance matching devices.

Bypass mode (Impedance switch set to “BYPASS”) This method requires the use of external impedance matching devices such as the Russound LPTx or ALTx volume controls, as the selector’s overload protection and impedance matching will be bypassed. In this mode, using external impedance matching volume controls will allow higher system efficiency and a configurable level of impedance matching for specific amplifier needs beyond the scope of the selector alone.

 

Features

  • Designed for quality audio performance and long-term reliability
  • Impedance matching and automatic overload protection compatible with highpowered amplifiers
  • Bypass mode for higher efficiency when using remote impedance-matching volume controls
  • Isolated inputs provide safe connection to bridge or floating type amplifiers
  • Spring-loaded speaker terminals accommodate up to 12-gauge wire
  • Designed for use with 8 ohm speakers

Specification

Power Handling SS-4.2 200 W/CH peak, 100 W/CH RMS
SS-6.2 200 W/CH peak, 70 W/CH RMS
Frequence Response +/- 0dB 20Hz to 20kHz
Wire 16 AWG to 12 AWG standard speaker wire
Dimensions SS-4.2 8.5″W X 1.80″H X 6.25″D (216 x 45 x 159 mm)
SS-6.2 11.5″W X 1.80″H X 6.25″D (292 x 45 x 159 mm)
Weight SS-4.2 2.75 lb.(1.2 kg)
SS-6.2 3.5 lb. (1.6 kg)

Tech Info

Russound SS4.2/6.2 Manual

 

Reviews

There are no reviews yet.

Be the first to review “Russound 6 Pair Speaker Switch Selector, Single Source”

one × one =

X