The KDA S-Video splitter takes a single composite or S-Video source and splits it to four displays. Each video output is a
perfect copy of the input, because all video and audio lines are buffered.
Superior to simple splitters, which merely share the signal between your destinations and subsequently reduce the picture brightness and quality, the KDA
regenerates the input video, restoring correct levels for distribution to your two displays. This maintains the brightness of the picture, and also helps to isolate both displays.
The load on one will not affect the other.
The KDA S-video splitter also has a switchable line drive feature, giving the ability to send audio and/or video over much longer cable runs than normally
possible (up to 100m dependant on cable). It works by applying a signal boost with emphasis on higher frequencies and use of wideband ICs with very low output
impedance.
For sending the S-video and stereo audio output around your house consider using the MuxLab S-Video and
stereo audio baluns. These allow you to use
standard Cat5e cable terminated with RJ45 plugs or data outlets.
Specification
- Video bandwidth: 50MHz distortion: <50db up to 10Mhz
- Back terminated series 75R outputs for reflection free performance
- DC coupled on Composite video and Luminance outputs
- AC coupled on Chrominance output
- Slew rate up to 1000v/uS
- Audio distortion: <0.1% bandwidth: 20Hz – 30KHz
- Audio output impedance: 1K ohms each output
- Audio input impedance: >10K ohms
- Power: 12-18v DC @ 300mA or greater. (UK adaptor supplied)
- Dimensions 144 x 111 x 64mm
- Weight 680g (exc supply & cables)
01603 660901
