-
Rako Custom Etched Buttons
£48.00When you have installed your Rako lighting and home control system, why not upgrade to some bespoke etched custom keypad buttons. Rako offer a service to bespoke design your Rako keypad buttons. You can have the buttons on your keypad etched with any combination of room name, lighting scene or function to suit your requirement
-
Rako Pre-Programming Module Service
£0.00CyberSelect now offer a Rako Pre-Programming Service for Rako Lighting Control modules purchased from CyberSelect.
We have an experienced installation team, who complete installs every week. These installations range from larger complex lighting systems, integrated lighting within a Smart Home, to small and simple Rako Lighting Control both Wired Systems and Wireless Systems working seamlessly together. They can assist with pre-programming of your modules for your Rako Lighting Control and Home Automation System.
-
Rako RACUB Curtain and Blind Control Module
£200.40The Rako RACUB is a compact dual relay RF switching module. Ideal for integrating motorised curtains, blinds and projector screens with the lighting control system. Controlled from any Rako Rakom RF device, for example the RPS030 /060 or RCM030 / 060 three or six button RF wall plates.
-
Rako RACUB-24DC Curtain and Blind Module
£200.40The Rako RACUB-24DC is a curtain and blind module for use with 24V motors requiring polarity reversing control.
-
Rako RACUB-2L Curtain and Blind Module
£200.40The Rako RACUB2L is a Curtain and Blind module internally wired for dedicated use with 240V motors with twin live connections (Up and Down).
-
Rako RAMPI Interface and RASOFT software for PC
£166.80The Rako RAMPI USB Programming Interface is designed to operate with the Rako Rasoft Pro programming software the RAMPI allows easy programming of a wireless Rako system. The RAMPI also supports NFC (Near Field Communication) programming of Rako’s NFC devices such as the RNC control panels and RCI interface modules.
-
Rako RAMVR For single mains-voltage or volt-free input
£156.00The Rako RAMVR replaces its predecessor the RAVFR, it is a Wireless system interface for a single mains-voltage or volt-free input. Ideal for interfacing with a mains
indoor or outdoor PIR sensor. The RAMVR can be used where a RAPIR is not suitable such as in external installations. It also allows sensors using other detection methods such as break-beam or microwaves to be used.The RAMVR is mains powered. Programming is required using Rasoft Pro for advanced functionality.
-
Rako RAPIR Wireless PIR with Integrated Daylight Sensor
£211.20The Rako RAPIR is a mains powered ceiling-mounted PIR motion detector with a 360° sensor pattern. The unit is ideally suited to office and residential applications where automatic scene selection is required.
-
Rako RAVIR Infrared to RF interface module
£220.80The Rako RAVIR is designed to be located out of sight along with other audiovisual sources it creates a link between infrared based controllers and Rako RF based receivers. It is an infrared to RF interface to convert infrared control signals to Rakom RF.
-
Rako RCM-020 2 Button Wireless Keypad Module
£157.20The Rako RCM-020 Wireless keypad module is compatible with the RLF and RVF series coverplates. It is a wireless 2 button control module that arrives pre configured for a scene 1 on, and off option. As the unit is wireless it can be mounted anywhere on a rigid surface you will need the coverplate kit for mounting. It is also suitable for all switch accessory plates that use a 50x50mm grid and cover plate arrangement.
-
Rako RCM-070 7 Button Wireless Keypad Module
£157.20The RCM070 push button control module comes pre-configured for selecting 4 scenes, off and master raise & lower. The wall plate controllers are designed to be mounted anywhere, be it flush mounting to UK back-boxes or simply surface mounted to any flat surface using the pattress provided. It is also suitable for all switch accessory plates that use a 50x50mm grid and cover plate arrangement
-
Rako RCM-100 10 Button Wireless Keypad Module
£157.20The RCM100 push button control module comes pre-configured for selecting 7 scenes, off and master raise & lower. The wall plate controllers are designed to be mounted anywhere, be it flush mounting to UK back-boxes or simply surface mounted to any flat surface using the pattress provided. It is also suitable for all switch accessory plates that use a 50x50mm grid and cover plate arrangement.
-
Rako RDA 800 Universal Control Module
£19.20A compact 800VA RF dimmer for 1-10V, DALI and DSI controllable loads. Connected in-line before the first lighting fitting the RMS800 enables switching of up to 800VA of 0-10V, DALI and DSI controllable loads such as LED drivers and dimmable fluorescent ballasts. Controlled from any Rako Rakom RF device, for example the RCP/RCM push button RF wall-plates.
-
Rako RK-EOS-6 Control Module – Wireless System
£196.80The Rako RK-EOS range is a wireless 6 button, push button control module. Lithium battery powered that can be mounted anywhere without having to run cabling. The Rako RK-EOS is customisable and programmable via NFC (Near Field Communication) using Rasoft Pro Software and Rako’s RAMPI programming interface.
-
Rako RK-HUB Network interface for Rako wireless systems
£330.00The Rako RK-HUB is a powerful network interface for Rako wireless systems with built in cloud services interface, time and advanced programming features.
-
Rako RLC Wireless Handheld Enclosure & Cover Plate Kit
£36.00If you are looking for a handheld control panel to use with your Rako Wireless Lighting Control or Rako Wireless Home Automation system, the RLC Handheld Cover Plate could be for you. It is designed to be used with the RCM or RNC keypad modules, and is totally portable and can be used anywhere around the home where your Rako Wireless system is installed.
-
Rako RLED150CV1 Wireless LED Dimmer
£237.60The Rako RLED150CV1 wireless Single channel 150w Dimmer is a compact single channel 150W constant voltage LED dimmer with in-built RF receiver and Rako processor for control of single channel constant voltage LED tape light.
The Rako RLED150CV1 is programmed using either a RCM/RCP RF wallplate or the RASOFT PC software suite, the unit stores the house, room and channel address plus 16 preset scene levels in non volatile memory. The RLED150CV1 dimmer can be controlled from any Rako transmitter such as RCM/RCP wallplates, RAH hand helds and Bridge modules and forms the foundation of any Rako scene-set system. For more information on dimming LEDs refer to Rako’s application sheet ‘Controlling LED Lighting With Rako Dimmers and Modules’.
-
Rako RLED20CC3 3 Channel Constant Current Dimmer (RGB)
£189.60The Rako RLED20CC3 is a 3x 20w constant current LED driver with in-built RF receiver and Rako processor. Designed to control 3 channel constant current LED fittings with selectable outputs of 350, 500, 600 and 700mA.
When the RLED20CC3 is used with 3 colour (eg RGB) light fittings each colour is assigned a channel and can be discretely adjusted allowing complete colour mixing. Simple colour cycling is controlled using the raise/lower buttons from any Rako controller.
-
Rako RLED30 Slave Colour Booster
£141.60For larger systems Rako RLED30 Slave would be used to extend or amplify your desired circuit. The RLED30 Slave is a 4 channel colour booster to be used with the RLED30CV4.
The RLED30Slave is designed to work with RLED30CV4 modules where the length of tape exceeds the capacity of the RLED30CV4. The RLED30Slave is fed the output signal from the RLED30CV4 and allows a further length of tape to be controlled from the same base RLED30CV4 unit. This method of slaving is more cost effective than having multiple RLED30CV4 units but importantly allows colour cycling to remain in sync where multiple RLED30CV4 units may drift due to slight differences in the internal clocks.
-
Rako RLED30CV4 4 Channel Wireless (RGBW) Driver/Controller
£190.80The RLED30-CV4 is a wireless 4 channel, 30w/channel (Red, Green, Blue & White) constant voltage colour controller, For larger systems the Rako RLED30 Slave would be used to extend or amplify your desired circuit.
A compact 4 channel 30W per channel, constant voltage LED dimmer with in-built RF receiver and Rako processor for control of 4 channel constant voltage LED fittings.
-
Rako RLED45CC1 Wireless 45W Constant Current Dimming Module
£160.80The Rako RELD45CC1 is a compact 45W constant current LED dimmer. Designed as part of the Rako Wireless range with built-in RF receiver and Rako processor for constant current LED fittings. To suite differing loads the RLED45CC1 has five selectable outputs of 350, 500, 600, 700 and 1000mA and a voltage range of 3-45V DC.
-
Rako RLED75CV1 Wireless Single Channel 75w Dimmer
£160.80The Rako RLED75CV1 is An in-line RF 75w single channel, constant voltage dimming LED driver. The compact single channel 75W constant voltage LED dimmer with in-built RF receiver and Rako processor for control of single channel constant voltage LED fittings. Controlled from any Rako Rakom device, e.g. RCP/RCM wall plates or Bridge interface units.
-
Rako RLF-020-BN Screwless Faceplate for RCN and RNC Keypad Series
£54.00The Rako RLF-020, Black Nickel, 2 button Screwless Cover Plate Kit, is suitable for Wireless Rako RNC-020 and RCM-020 Keypad Modules only.
Keypads are sold available separately
-
Rako RLF-020-MSS Screwless Faceplate for RCN and RNC Keypad Series
£54.00The Rako RLF-020, Mirrored Stainless Steel, 2 button Screwless Cover Plate Kit, is suitable for Wireless Rako RNC-020 and RCM-020 Keypad Modules only.
Keypads are sold available separately
- Phone: (01603) 789 840
