Product Description
The Blustream SW41AB-V2 is a 4-Way HDMI switch with integrated audio breakout. The V2 switch supports full HDMI 2.0 and HDCP 2.2 with video resolutions up to and including 4K @ 60Hz 4:4:4.
£10,077.55 (incl. VAT)
£177.40 (Inc. VAT)
£147.83 (Exc. VAT)
In Stock
The Blustream SW41AB-V2 is a 4-Way HDMI switch with integrated audio breakout. The V2 switch supports full HDMI 2.0 and HDCP 2.2 with video resolutions up to and including 4K @ 60Hz 4:4:4.
Are you a trade customer? If so please call for your preferential trade pricing.
The Blustream SW41AB-V2 is a 4-Way HDMI switch with integrated audio breakout. The V2 switch supports full HDMI 2.0 and HDCP 2.2 with video resolutions up to and including 4K @ 60Hz 4:4:4.
Key Features
Whats in the Box
Video Input Connectors | 4x HDMI Type A |
Video Output Connectors | 1x HDMI Type A |
Audio Output Connectors | 1x RCA (SPDIF) & 1x Analogue audio L/R (3.5mm stereo Jack) |
IR Input Ports | 1x 3.5mm stereo Jack |
RS232 Control Port | 1x DB9 (female) – V2 product only |
V2 Product Dimensions (WxDxH) | 200 x 104 x 41mm (with connections) |
V2 Product Dimensions (WxDxH) | 200 x 94 x 41mm (without connections) |
Product Weight | 0.45kg (excluding accessories) |
Shipping Weight | 0.9kg |
Operating Temperature | 32°F to 104°F (0°C to 40°C) |
Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
Power Supply | 5V / 2A DC |
Do you need to send Sky HD or any 1080p source only using coax cable? Then this Blustream CEX120B-Kit could be your answer, it is the perfect “Get out of Jail” solution. The CEX120B-KIT HDMI extender set offers HDMI distribution over a single Coaxial cable. The product delivers HDMI & Bi-directional IR up to lengths of 120m @ 1080p**
This is an EOL product – please call for availability
Are you a trade customer? If so please call for your preferential trade pricing.
The latest addition EXP-SP-0102-H2, Ultra Slim, Ultra High Definition, WyreStorm Essentials splitter , the now offers H2 features and the same value and reliability found in its predecessor, not to mention a few new tricks up its sleeve! Upgrades to support of the full 18Gbps bandwidth HDMI 2.0 offers; 2160p@60Hz 4:4:4 and support for Dolby Vision™ included. As if that wasn’t enough, the EXP-SP-0102-H2 is now featuring a powerful built-in scaler, allowing users to simultaneously connect a mix of 4K and 1080p displays, which gives the source range to play to its fullest potential!
The new compact and stylish, Triax Tri-Link Kit solves the issue of Freesat, Sky and Freeview distribution around the home. The Triax-Tri Link gives you the ability to view and control all STB’s on existing analogue sets.
The Blustream SW21AB-V2 is a 2-Way HDMI switch with integrated audio breakout. The switch supports full HDMI 2.0 and HDCP 2.2 with video resolutions up to and including 4K @ 60Hz 4:4:4.
With EDID Control it is easy ot set up, While the objective of EDID is to make connecting a digital display to a source a simple plug and play procedure, issues do arise when multiple displays or video matrix switching is introduced because of the increased number of variables. By pre-determining the video resolution and audio format of the sources and display device you can reduce the time needed for EDID hand shaking thus making switching quicker and more reliable. Configuration of extender EDID settings can be achieved using the product dip-switches on the SW21AB-V2. EDID dip-switch settings are shown below. Note: You must power cycle the product after making EDID changes. For some sources it may be necessary to power cycle the source after EDID changes have been made for the source to update its video & audio output settings.
(Please be aware this product is not auto switching)
Are you a trade customer? If so please call for your preferential trade pricing.
The Blustream SP18 4K HDMI 2.0 splitter distributes a single HDMI source to eight simultaneous outputs. The Blustream SP18 splitter supports full HDMI 2.0 and HDCP 2.2 with video resolutions up to and including 4K @ 60Hz 4:4:4
The Labgear LDU604G is designed to distribute any combination of Sky, Sky+, FM, DAB, UHF and CCTV signal around your home and is 4G/LTE Ready.
The built-in mode switch optimises the unit according to the requirements – either for systems with a satellite receiver , or those without.
This is the replacement for the HDU641G model.
The Blustream HSP14CS 4K HDBaseT™ CSC splitter distributes a single HDMI 2.0 4K 60Hz 4:4:4 source to four simultaneous HDBaseT™ outputs with independant down-scaling of 4K video inputs to allow those displays only capable of supporting lower video resolutions to receive 4K video while still showing maximum original 4K UHD resolution on the higher-definition displays
Blustream are pleased to announce the launch of our latest Blustream extender. The new HEX70SL-KIT is our smallest form factor HDBaseT™ extender kit. Boasting compatibility with all current Blustream HDBaseT™ Matrix, Spitters and Switchers, the HEX70SL provides a discreet high performance option for our partners.
The Blustream Active Precision 18 HDMI cables utilise integrated circuits that measure, analyse and adjust the video signal  to ensure 18Gbps pass through for support of all the latest 4K resolutions including 4K 60 Hz 4:4:4 colour space, HDR, Dolby Vison and 8/10/12 bit colour.
In situations where higher bandwidth is required, use the FBS402. This Labgear FBS402 2 way splitter handles frequencies from 5 to 2400MHz, making it suitable for situations involving undecoded Sky or Freesat signals, for example where you want to have two alternative Sky box locations of which only one will be used at a time. Like the FJU402 this also has DC pass through on both ports but in this case the DC pass is only in one direction – from the two split ports back to the single input port. The FBS402 unit has a 4dB loss between 5 and 40Mhz, rising to 6dB at 2300Mhz.
The Blustream IP200UHD-RX IP Multicast UHD Video Receiver over 1GB Network features Built-in Video Scaler, Video-wall mode, Bi-directional IR, RS-232 & USB/KVM, PoE, Analogue Audio Breakout and HDCP 2.2
The Kramer VGA to 3 RCA phono breakout cables are used when a source or display can be configured to send or receive either VGA or Component video signals. For example Panasonic 11 series eg TH-42PH11BK, TH-50PF11BK or TH-65PF11BK have VGA inputs as standard that can also accept component video on the same connector. Using this adaptor cable allows you to input component video without the need to purchase a component video terminal board, or to have two sources of component video into the one screen if you do have the terminal board.
Reviews
There are no reviews yet.