£374.40 (incl. VAT)
-
Rako RACUB Curtain and Blind Control Module
£222.00The Rako RACUB is a compact dual relay RF switching module. Ideal for integrating motorised curtains, blinds and projector screens with the lighting control system. Controlled from any Rako Rakom RF device, for example the RPS030 /060 or RCM030 / 060 three or six button RF wall plates.
Add to cartThe product is already in the wishlist! Browse Wishlist -
Rako RACUB-24DC Curtain and Blind Module
£222.00The Rako RACUB-24DC is a curtain and blind module for use with 24V motors requiring polarity reversing control.
-
Rako RACUB-2L Curtain and Blind Module
£222.00The Rako RACUB2L is a Curtain and Blind module internally wired for dedicated use with 240V motors with twin live connections (Up and Down).
-
Rako RAMPI Interface and RASOFT software for PC
£184.80The Rako RAMPI USB Programming Interface is designed to operate with the Rako Rasoft Pro programming software the RAMPI allows easy programming of a wireless Rako system. The RAMPI also supports NFC (Near Field Communication) programming of Rako’s NFC devices such as the RNC control panels and RCI interface modules.
-
Rako RAMVR For single mains-voltage or volt-free input
£174.00The Rako RAMVR replaces its predecessor the RAVFR, it is a Wireless system interface for a single mains-voltage or volt-free input. Ideal for interfacing with a mains
indoor or outdoor PIR sensor. The RAMVR can be used where a RAPIR is not suitable such as in external installations. It also allows sensors using other detection methods such as break-beam or microwaves to be used.The RAMVR is mains powered. Programming is required using Rasoft Pro for advanced functionality.
-
Rako RDA 800 Universal Control Module
£212.40A compact 800VA RF dimmer for 1-10V, DALI and DSI controllable loads. Connected in-line before the first lighting fitting the RMS800 enables switching of up to 800VA of 0-10V, DALI and DSI controllable loads such as LED drivers and dimmable fluorescent ballasts. Controlled from any Rako Rakom RF device, for example the RCP/RCM push button RF wall-plates.
-
Rako RLED150CV1 Wireless LED Dimmer
£262.80The Rako RLED150CV1 wireless Single channel 150w Dimmer is a compact single channel 150W constant voltage LED dimmer with in-built RF receiver and Rako processor for control of single channel constant voltage LED tape light.
The Rako RLED150CV1 is programmed using either a RCM/RCP RF wallplate or the RASOFT PC software suite, the unit stores the house, room and channel address plus 16 preset scene levels in non volatile memory. The RLED150CV1 dimmer can be controlled from any Rako transmitter such as RCM/RCP wallplates, RAH hand helds and Bridge modules and forms the foundation of any Rako scene-set system. For more information on dimming LEDs refer to Rako’s application sheet ‘Controlling LED Lighting With Rako Dimmers and Modules’.
-
Rako RLED30CV4 4 Channel Wireless (RGBW) Driver/Controller
£211.20The RLED30-CV4 is a wireless 4 channel, 30w/channel (Red, Green, Blue & White) constant voltage colour controller, For larger systems the Rako RLED30 Slave would be used to extend or amplify your desired circuit.
A compact 4 channel 30W per channel, constant voltage LED dimmer with in-built RF receiver and Rako processor for control of 4 channel constant voltage LED fittings.
-
Rako RLED45CC1 Wireless 45W Constant Current Dimming Module
£187.20The Rako RELD45CC1 is a compact 45W constant current LED dimmer. Designed as part of the Rako Wireless range with built-in RF receiver and Rako processor for constant current LED fittings. To suite differing loads the RLED45CC1 has five selectable outputs of 350, 500, 600, 700 and 1000mA and a voltage range of 3-45V DC.
-
Rako RLED75CV1 Wireless Single Channel 75w Dimmer
£178.80The Rako RLED75CV1 is An in-line RF 75w single channel, constant voltage dimming LED driver. The compact single channel 75W constant voltage LED dimmer with in-built RF receiver and Rako processor for control of single channel constant voltage LED fittings. Controlled from any Rako Rakom device, e.g. RCP/RCM wall plates or Bridge interface units.
-
Rako RML 500w Leading Edge Dimmers
£177.60The Rako RML-500 (500w) RF Dimmer is designed to fit through the aperture of a standard low voltage down light fitting. The dimmer is connected in-line before the first light fitting, to enable dimming of up to 500w/250w of leading edge dimmable loads.
-
Rako RML-1200 Leading Edge 1200W Wireless Dimmer Module
£273.60For Flexible lighting control the Rako RML-1200 Leading Edge 1200W Wireless Dimmer Module is an inductive dimmer thaT can control up to 1200 watts of mains dimmable lighting loads. The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP rated enclosure.
-
Rako RMR-VF Wireless – 10 Volt-free Contact Closure Inputs
£273.60The Rako RMR-VF is an interface unit to convert volt-free contact signals into Rako wireless RAKOM messages. This unit creates an interface between volt-free contact or DC logic inputs and Rako RF based receivers. The unit accepts up to 10 contact closures which can be mapped using RASOFT Pro to mimic keypad presses.
-
Rako RMS-800 Switching Module
£128.40The Rako RMS-800 switching module can control up to 800 watts of mains non dimmable lighting loads. The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP rated enclosure. The robust microprocessor design combines reliable switching with dynamic safety features such as auto-resetting over current and voltage surge protection. The RMS-800 switch module can be controlled from any Rako transmitter such as RCP/RCM wallplates, RAH hand helds, MB1 timeclocks and forms the foundation of any Rako scene-set system
-
Rako RMT-1200 Trailing Edge 1200W Wireless Dimmer Module
£273.60The Rako RMT-1200 is a compact 1200W RF dimmer designed to be mounted in a ceiling void using an access panel or wall mounted in an electrical cupboard. The primary purpose of the RMT-1200 Trailing Edge Module is for dimming GU10 LED lamps, tungsten, low-voltage halogen and other trailing edge dimmable loads.
-
Rako RMT-500 Trailing Edge Dimmer
£177.60The Rako RMT-500 is a trailing edge 500W ceiling-mount dimmer.The RMT500 uses trailing edge dimming technology to maximise the performance of most GU10 dimmable LED down-lights (refer to Rako Controls for compatibility and maximum loadings). The RMT500 is also the recommended dimmer for GU10 tungsten lamps due to its in-built short circuit protection, necessary with this style of lamps.
-
Rako RMT-PILL Trailing Edge 250W Back Box Dimmer
£177.60The Rako RMT-PILL is designed to offer flexible control and fits in to a standard UK or European back-box. A compact 250W RF dimmer designed to be located in a standard UK or European backbox. The RMT-Pill can be used either with or without a neutral allowing it to be used with dedicated wiring or retrofit into a standard wiring situation. Trailing edge technology for quiet reliable dimming of any non-inductive load when used with a neutral or tungsten GLS and tungsten halogen GU10 style lamps when used without. Controlled from any Rako Rakom device or simple contact closure input using a momentary push switch.
-
Rako RSR-DALI Wireless Receiver Module
£477.60The Rako RSR-DALI is a wireless receiver module with outputs to control 15 channels of addressable DALI fittings in a single Rako Room.
-
Rako RSR-DMX 15 Channel DMX Control Module
£294.00Meet the new Rako RSR-DMX 15 Channel DMX Control module, it is a wireless 15 channel DMX controller for DMX controlled LED and other DMX light fixtures such as colour changing LED drivers and fibre optic projectors.
Designed to be connected to the Rako Rakom wireless network and be controlled by any Rako wireless transmitter device such as the RCM wall plates or RA/RTC Bridges.
-
Rako WMCUB Twin Relay Curtain & Blind Control Card
£141.60The Rako WM-CUB is a Twin Relay curtain and blind control card which forms part of the new RAK8 modular system. The new RAK8 modular system allows you to add individual control cards to your RAK8-MB (modular board) with complete flexibility to build a bespoke system to meet your requirements. The WM-CUB is used for implementation of control, for motorised curtains, screens and blinds. Delivering an open, close and stop functionality.
-
Rako WRB100 RAKOM Wireless Signal Repeater
£252.00The Rako WRB100 is a flexible signal repeater for use with either wireless only or combined wired and wireless Rako systems. The Rako WRB100 can be or used with either wireless only or combined wired and wireless Rako systems.
