£369.60 (incl. VAT)
- Phone: (01603) 789 840
Rako RK-EOS-6 Control Module – Wireless System
£229.20 (Inc. VAT)
£191.00 (Exc. VAT)
In Stock
Quick Overview
The Rako RK-EOS range is a wireless 6 button, push button control module. Lithium battery powered that can be mounted anywhere without having to run cabling. The Rako RK-EOS is customisable and programmable via NFC (Near Field Communication) using Rasoft Pro Software and Rako’s RAMPI programming interface.
Product Description
The Rako RK-EOS range is a wireless all metal 6 push button NFC control module. It is powered Lithium battery and can be mounted anywhere without having to run cabling. The Rako RK-EOS is customisable and programmable via NFC (Near Field Communication) using Rasoft Pro Software and Rako’s RAMPI programming interface. To programme you will need the RAMPI dongle.
The RK-EOS push button wireless control module is programmable via Rako’s patented NFC (Near Field Communication) technology allowing each button to trigger a single or multiple commands. Each input is fully customisable, can be addressed to separate Rako Rooms or Channels and activate on press or release, giving a ‘Press and Hold’ function. Additionally each input can trigger an internal macro function. This product can only be programmed with a laptop using Rako’s Rasoft Pro software and the Rako RAMPI programming interface. The wall plate controllers are designed to be flush mounted to standard UK single gang back-boxes.
The image on this product shows the Rako RK-EOS-6 Control Module with the RP-EOS-6-WH Matt White Cover Plate
NB: You will need to purchase the RP-EOS-6 Cover Plate by Rako to install with your RK-EOS-6 Control Module.
Rako EOS screwless plate kits are available in the following selection of finishes:
- RP-EOS -6- WH – Matt White
- RP-EOS -6- MB – Matt Black
- RP-EOS -6- SC – Satin Chrome
- RP-EOS -6- PC – Polished Chrome
- RP-EOS -6- BM – Matt Bronze *
- RP-EOS -6- AB – Antique Brass
- RP-EOS -6- PB – Polished Brass
Specification
| Dimensions | 50x50x12mm – flush mount only |
| Fixing | Flush mounting into standard UK single gang back box, minimum 12mm deep |
| Input Supply | 6V DC – 2x 3V Lithium coin cell CR2016 (remote power supply version available |
| Weight | 100g |
| Battery Life | Greater than 3 years |
| Climate Range | Temperature +2C to +40C Humidity +5% |
| Standards | Emissions – EN61000-6-3 : 2007 Immunity – EN61000-6-1 : 2007 |
| Communication | Rakom coded fm radio, 433.9MHz |
| Memory | Flash memory (non volatile) |
Tech Info
Be the first to review “Rako RK-EOS-6 Control Module – Wireless System”
Up Sells Products
-
Rako RK-HUB Network interface for Rako wireless systems
£384.00The Rako RK-HUB is a powerful network interface for Rako wireless systems with built in cloud services interface, time and advanced programming features.
-
Rako RAMPI Interface and RASOFT software for PC
£184.80The Rako RAMPI USB Programming Interface is designed to operate with the Rako Rasoft Pro programming software the RAMPI allows easy programming of a wireless Rako system. The RAMPI also supports NFC (Near Field Communication) programming of Rako’s NFC devices such as the RNC control panels and RCI interface modules.
-
Rako RP-EOS-6 Cover Plate – Wireless System
£74.40The Rako RP-EOS range is a wireless 6 button, push button Cover Plate for the RK-EOS-6 control module.
The RP-EOS is the newest cover plate and control module range from Rako. The all new new EOS push button control modules are available as wired or wireless NFC. Built around an all metal screwless flush fascia design, this elegant range offers specifiers and end clients a clean uncluttered look for their projects with six configurable buttons offering scene, curtain/blind and audio control options.
Click on the drop down menu to make your choice of finish
Related Products
-
Rako RMT-PILL Trailing Edge 250W Back Box Dimmer
£177.60The Rako RMT-PILL is designed to offer flexible control and fits in to a standard UK or European back-box. A compact 250W RF dimmer designed to be located in a standard UK or European backbox. The RMT-Pill can be used either with or without a neutral allowing it to be used with dedicated wiring or retrofit into a standard wiring situation. Trailing edge technology for quiet reliable dimming of any non-inductive load when used with a neutral or tungsten GLS and tungsten halogen GU10 style lamps when used without. Controlled from any Rako Rakom device or simple contact closure input using a momentary push switch.
-
Rako WSR-DMX Wired-System 15 Channel DMX Control Module
£301.20The Rako WSR-DMX is a 15 channel DMX controller for use with the Rako Rakom wired network. It can be used to control DMX light fittings or interfaces such as colour changing LED drivers and fibre optic projectors.
-
Rako RMR-VF Wireless – 10 Volt-free Contact Closure Inputs
£273.60The Rako RMR-VF is an interface unit to convert volt-free contact signals into Rako wireless RAKOM messages. This unit creates an interface between volt-free contact or DC logic inputs and Rako RF based receivers. The unit accepts up to 10 contact closures which can be mapped using RASOFT Pro to mimic keypad presses.
-
Rako WP-EOS-6 Cover Plate Wired – Polished Chrome
£74.40Rako WP-EOS-6 in Polished Chrome 6-Button wired EOS wall plate controller connects to the RAKOM wired CAT5 network and is preconfigured with 3 scenes, off and master raise and lower buttons.
-
Rako RLED150CV1 Wireless LED Dimmer
£262.80The Rako RLED150CV1 wireless Single channel 150w Dimmer is a compact single channel 150W constant voltage LED dimmer with in-built RF receiver and Rako processor for control of single channel constant voltage LED tape light.
The Rako RLED150CV1 is programmed using either a RCM/RCP RF wallplate or the RASOFT PC software suite, the unit stores the house, room and channel address plus 16 preset scene levels in non volatile memory. The RLED150CV1 dimmer can be controlled from any Rako transmitter such as RCM/RCP wallplates, RAH hand helds and Bridge modules and forms the foundation of any Rako scene-set system. For more information on dimming LEDs refer to Rako’s application sheet ‘Controlling LED Lighting With Rako Dimmers and Modules’.
-
Rako RLF-020-BN Screwless Faceplate for RCN and RNC Keypad Series
£61.20The Rako RLF-020, Black Nickel, 2 button Screwless Cover Plate Kit, is suitable for Wireless Rako RNC-020 and RCM-020 Keypad Modules only.
Keypads are sold available separately
-
RAKO-RK-PIR Ceiling mounted occupancy sensor
£234.00The RAKO RK-PIR is a Ceiling mounted occupancy sensor with built in smart, time conditional features and light sensing.
The WK-PIR motion detector allows Rako wireless commands to be transmitted automatically when sensing movement. Providing a highly sensitive motion detection over a large area.
Presented in a discrete and aesthetically improved design, a 48mm diameter ceiling cut out is required. For mounting, it is held in place with internal metal clips, no fixing screws are required.
-
Rako RAK8-MB Modular Dimming / Control Rack
£558.00The RAKO RAK8-MB is a 8 Channel modular dimming rack motherboard. It has 8 individual channel “slots” that allow complete flexibility of controlled loads when fitted with either of the WMT-400, WDA-600, WMS600 or WM-CUB control cards (these are an additional purchase) The RAK8 unit is stackable with other RAK8 units. It requires a RAK-LINK for wired systems or RX-LINK for wireless controlled systems.
-
Rako RMT-500 Trailing Edge Dimmer
£177.60The Rako RMT-500 is a trailing edge 500W ceiling-mount dimmer.The RMT500 uses trailing edge dimming technology to maximise the performance of most GU10 dimmable LED down-lights (refer to Rako Controls for compatibility and maximum loadings). The RMT500 is also the recommended dimmer for GU10 tungsten lamps due to its in-built short circuit protection, necessary with this style of lamps.
-
Rako WLED75CV1 wired 75w constant voltage dimming LED driver
£207.60The Rako WLED75CV1 is a wired 75W constant voltage LED dimmer designed for use with single channel constant voltage LED fittings and single channel LED tape light. Maximum wattage of 75W for 12V d.c. fittings or 150w for 24V d.c. fittings. Requires a suitable external d.c. power supply (normally the power supply that would be supplied with the fitting for a non-dimming application).
Controlled from any Rako Wired device, e.g. WCM, WAPIR or from wireless devices via a WA/WTC-Bridge or WRB100.
-
Rako RSR-DALI Wireless Receiver Module
£477.60The Rako RSR-DALI is a wireless receiver module with outputs to control 15 channels of addressable DALI fittings in a single Rako Room.
-
Rako RNC-100 Wireless NFC 10 Button Keypad module
£193.20The RNC wireless push button wall plate controller with 4 scenes, off and master raise and lower buttons. Customisable and programmable via NFC (Near Field Communication).
The RNC-100, 10 button control module is programmable via Rako’s patented NFC (Near Field Communication) technology allowing each of the buttons to trigger a single or multiple commands. Each input is fully customisable, can be addressed to separate Rako Rooms or Channels and activate on press, or release which gives a ‘Press and Hold’ function.
Reviews
There are no reviews yet.